Originally Posted by 03 rammer
Torque increases haha now that you mention that, that is something I never found out. lol
To all of the other questions for my model programmer and year: yes, yes,yes,yes and yes. 
I've done over 120mph |
I sent an email to Quad asking the same questions and below is their reply.
"Ken
The module is not able to change anything with the Torque Management. In our Custom Tuning options you can lower the Rail Pressure Minimum setting to make it more aggressive on the lower end. The timing is not adjustable it is fixed for each power setting and the speed limiter cannot be removed since we are not going through the ECM."
You Quad may be different than the new ones out.
Also, here are the torque numbers to go with the hp settings. Was not on the Quad web site
PL 00- Off
PL 01- Max Mileage
PL 02- 35hp/60 ftlbs
PL 03- 50hp/90 ftlbs
PL 04- 65hp/120 ftlbs
PL 05- 80hp/150 ftlbs
PL 06- 95hp/180 ftlbs
PL 07- 110hp210 ftlbs
PL 08- 125hp/250 ftlbs
PL 09- 140hp/290 ftlbs
PL 10- 160hp/350 ftlbs
Threaded Mode
