Morimoto Projector Retrofit

[AWE Daniel]

WORK IN PROGRESS


So Getting the Headlights Apart wasn't too bad. The first headlight was a bitch, but the second one was very easy.








The next step is to remove the bulb cover (that was a pain), and the 9006 Plate that was on the back. That came out with the removal of 3 screws.


On the Projectors there is an H1 adapter plated connected by 3 tiny screws, you have to remove those screws to take that off, then there is a big nut that screws the projector into place. Take that nut off, then fit the projector through the headlight, make sure to put the rubber washer (included) on the back of the projector, and tighten the nut down so it is very snug.

Then re-attach the H1 Adapter plate with the 3 screws. That is all it takes to put the projectors in!










Now the shrouds I ordered were too big for these headlights so I have to wait for the new ones to come in, hopefully Saturday. Ill finish this when they come in.

[Onk]

Damn dude...lookin good!!

[ramn it]

looks good !!! also looks like alot of work but will be saweeet when your done

[LB3711]

Sweet. I love my projectors

Sent from my Transformer TF101 using Tapatalk

[shadow11]

Tits!!

[Onk]

Bananas!!!!

[BAD HABIT]

Aweeome, I need this done, will be looking into it now.

Sent from my badass EVO on TapaTalk....

[AWE Daniel]

Morimoto mini h1's, couldn't be much easier

Sent from my mwp6985 using Board Express

[AWE Daniel]

Well Good News is that I was wrong about the Shrouds, they do fit, just not the way I was thinking. Bad News is I had allready ordered some replacements. Ohh well they were only 15 bucks.

So here is the rest of the Pictures, they are in the Car Now.

[shadow11]

Looks good.