06-27-2011, 09:30 PM
|
#2
|
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
Originally Posted by OklaHemi
how much were they running? i found a few sets on ebay yesterday for 90.00 shipped
your frame is sitting on them right
|
Mike, I haven't looked at those, as the p/n I provided are individual pieces as there is no kits for using these on lowered trucks, The rear sits within a 1/4" of the axle. The fronts I have adjusted so as not to rub.
Originally Posted by ramn it
I cut the front springs I think 1/2 coil and 4in drop eibach leafs in the back and then nitro drop shocks I rub a little on bad dips but I ve learned to spot them out most of the time .
|
With the Aeon springs you would not need to bother with avoiding anything you wouldn't normally avoid. I chase sport cars on the back roads here to the point I have seen them lifting wheels and Red stays planted. It's that good.
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
Hybrid Mode
