05-23-2011, 04:20 PM
|
#24
|
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
The flip kit has a 4-1/2 hole that I moved to this morning. Took about 20 minutes, jacked the rear up about 8 inches using a floor jack to take the load off the springs. Loosen the bolts, flex the spring by hand and pull the bolt, push the spring up to the next nole and slip the bolt back in the higher hole. Tighten the nut and repeat on the other side. The truck sits almost level with the ass a 1/4" higher than the front side to side it's level. The ride is firm but not harsh, the suspension is done......
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
Threaded Mode
