LOWERING BLOCKS for 2 3/4 inch axle over leaf trucks...

[SmokedRam]

I have a brand new set of 2 inch lowering blocks for any truck with a 2 3/4 inch axle tube with the axle over the leaf or any 2 3/4 inch axles tube truck with a flip kit, with all hardware (ubolts and nuts/washers)....


They are black steel, not aluminum...I will let them go for $10 local pick up.

[OklaHemi]

So what will they work on coltons ram? If so I have dibs I'm going to mak him drop his ram. His is a 01 1500 I belive

[Fla 66 cuda]

I did some measurin on the cuda won't work for that i'm going to have to make some.

[SmokedRam]

So what will they work on coltons ram? If so I have dibs I'm going to mak him drop his ram. His is a 01 1500 I belive


I havent looked at my first gen but probably not...I believe the axle tubes are wider on the 1/2 ton trucks, so you will need wider ubolts...it might though...these were bought for my S10, but I never installed them...they are only specific to axle diameter though...not make/model specific...

[OklaHemi]

That sucks. Good luck on the sale. So these are for a s-10.... my boss just bought a 98 with a 350 in it ill check what the stancw is

[SmokedRam]

That sucks. Good luck on the sale. So these are for a s-10.... my boss just bought a 98 with a 350 in it ill check what the stancw is

not really for an S10...just out of the box they are for any truck with a 2 3/4 axle tube...like S10, Ranger (not sure what sixe is on the Dakota)...

[OklaHemi]

But you bought them for your s10 right. If he is interested ill have him measure

[SmokedRam]

But you bought them for your s10 right. If he is interested ill have him measure


exactly....so, I know for a fact they will fit onto an S10....