Project "SmokedRam"

[SmokedRam]

This is my project thread that will be updated everytime I mod the truck...

Truck specs:

2005 Ram 1500 SLT
Regular Cab/Short Bed
Mineral Grey

Pic the day I bought it:

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/523371_241775405918760_100002589086893_469862_9854 25843_n.jpg

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/539157_241775649252069_100002589086893_469863_1119 679226_n.jpg

Pic from a couple weeks ago, note that the steps and chrome bug shield have been removed:

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/555428_301199699976330_325402723_n.jpg

[SmokedRam]

MOD#1: ditching the stock chrome headlights for some black/chrom ones:

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/photo3.jpg

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/487761_307121559384144_811322192_n.jpg

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/photo-9.jpg

[Onk]

Time for some eyelids


< Sent from my iPad3 using Tapatalk >

[SmokedRam]

Time for some eyelids


< Sent from my iPad3 using Tapatalk >

NAHHH, not right now, it looks sporty now as is...

Looks good Adam.HID`s next.


No, Dave...next mod will be getting some black bed rail caps and removing the diamond plate ones...

Right now, I am gathering prices and comparing and comparing them, on the BakFlip ProCaps and the Bushwacker Smooth ones, without stake pocket holes.

[4XLGator]

I look forward to seeing the progress.

[AWE Daniel]

Gansta!

[UnderCover]

She's lookin good Adam! (Except for that Damn Semenholes plate!)

[repoman]

^lol seamenholes

[NOTPAID4]

You gotter' looking GREAT already!

[repoman]

hidcountry.com~ in sarasota!! our truck need the can-bus kit due to lights being computer controled....no flickering free replacement bulbs had mine 2 years no burnout beams no balast issues plug and play 10min install mine are 8k's check them out i need to go down there soon to get some lights

[old man]

lookin good Adam

[SmokedRam]

Thanks Dennis...how ya been buddy?

[Ms.MagnumSLT]

Lookin good! I have the same Headlights and love them.

[SmokedRam]

today, I modded the stock antenna down:

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/photo7-1.jpg

[4XLGator]

Looks good...just needs a few coats of black paint.

[SmokedRam]

Today I got a AirRaid intake tube and K&N filter from Awe Daniel...hopefully installing this weekend.

[Onk]

Pics or it didnt happen...

Sheesh...I thought you knew this by now...

[4XLGator]

^ for reals

[SmokedRam]

I'll take pics of it tonight, you bunch of impatient knuckleheads.

[johnnysart]

Lmao!!!!

[NJHemiGirl]

Pics or it didnt happen...

Sheesh...I thought you knew this by now...

True statement! LOL

[SmokedRam]

Here is the intake tube and filter...gotta pick up some 3-4" hose clamps and some K&N oil.

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/photo-11.jpg

[AWE Daniel]

Oh shit sorry I forgot about that stuff. Ooops!

[SmokedRam]

It's all good in the hood...no worries.

[AWE Daniel]

Yeah you would have needed to buy the recharge kit eventually anyway

[BAD HABIT]

I may have that stuff @ the house hose clamps and some oil, I know I got clamps.

BAD HABITS BADASS EVO ON TAPATALK TRANSPARENT...

[SmokedRam]

I may have that stuff @ the house hose clamps and some oil, I know I got clamps.

BAD HABITS BADASS EVO ON TAPATALK TRANSPARENT...

Orly? I just need enough oil to recharge it this one time...

[FL06SRT10]

Here is the intake tube and filter...gotta pick up some 3-4" hose clamps and some K&N oil.



I got a brand new recharger kit still sealed in box I'll give ya if ya buy me breakfast tomorrow ;) I don't eat much lol

[SmokedRam]

LOl Actually I just scored one here at work...one of my workers was reading this and said I could have his...

[FL06SRT10]

LOl Actually I just scored one here at work...one of my workers was reading this and said I could have his...

Darn I need breakfast lol ;)

[SmokedRam]

HAHAHA...Mike, did Jay get with you on the filter deal?

[FL06SRT10]

HAHAHA...Mike, did Jay get with you on the filter deal?

Nope it's here... That's where I'll get money for breakfast lol :)

[SmokedRam]

Lol

[SmokedRam]

Color Matched grille!

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/photo14.jpg

This weekend, adding my intake tube and K&N!

[FL06SRT10]

Color Matched grille!

This weekend, adding my intake tube and K&N!

Much better!!!

[4XLGator]

That's what I'm talkin' 'bout!!!

Great idea!

Looks awesome!

[4XLGator]

Today I got a AirRaid intake tube and K&N filter from Awe Daniel...hopefully installing this weekend.

Guess I put a stop to that shit! LOL

[SmokedRam]

guess i put a stop to that shit! Lol


hahahahahaha

[4XLGator]

hahahaha

[SmokedRam]

Got my build sheet from Dodge this morning...pretty stoked to see I have 3.92 gears rather than 3.55

Dear Adam:
Thank you for contacting the Dodge Customer Assistance Center.
We are pleased to provide vehicle build information per your request.
According to our records, your vehicle was equipped from the factory
with the following:
VIN 1D7HA16N25J563048
Vehicle Description DODGE RAM SLT 1500 REG. CAB PICKUP
Model Year 2005
Body Model DR 1 H 61
Sales Code --- Description
*M9 Cloth 40/20/40 Prem Bench Seat
-L5 Taupe
AHC Trailer Tow Group
APAS Monotone Paint
A82P 4.7L Eng (EVA)/5Spd A/T 5-45Rfe(DGQ)
BAZS 136 Amp Alternator
BCQP 750 Amp Maintenance Free Battery
BRRS 4 Wheel Disc Rr Anti-Lock Brakes
CBEP 40/20/40 Split Bench Seat
CGDS Front Height Adjust Shoulder Belts
CGZS Passenger Air Bag On/Off Switch
CG1S Next Gen Multistage Front Air Bags**
CKES Front Seat Area Carpet
CLAS Front Floor Mats
CSPS Passenger Assist Handle
CUSS Overhead Console w/Trip Computer
CU3S Behind the Seat Storage / Bin
CVHP Front Center Seat Cushion Storage
DGQ 5-Spd Automatic 545RFE Transmission
DHAP Lock-Up Torque Converter
DMH 3.92 Rear Axle Ratio
DRBS Corporate 9.25 LD Rear Axle
DSA Anti-Spin Differential Rear Axle
EAGC Gas Engine
EVA 4.7L V8 MPI Engine
GACS Tinted Glass Windows
GJDS Rear Fixed Window
GNK Rear View Auto Dim Mirror
GNMS Passenger Side Sun Visor w/Mirror
GTSS Power Heated Mirrors, Fold-Away
GXMS Remote Keyless Entry
HAAS Air Conditioning
HGBS Dash Liner Insulation
HGFS Floor Tunnel Insulation
I29S Route 29 - UP, Council Bluffs, IA
JAYS Instrument Cluster w/Tach
JCBS 120 MPH Primary Speedometer
JHAS Var Intermittent Windshield Wipers
JJAS Cigar Lighter
JJBS Dual Note Electric Horns
JJJS 12V Auxiliary Power Outlet
JPBS Power Locks
JPDS Power Windows, Driver One-Touch
JRDP Power Driver Seat
JTHP Power 6-Way Driver Seat
K1XP STRIPE/BADGE/MOLDING/COLOR
LBCS Glove Box Lamp
LMAS Halogen Headlamps
LNJ Fog Lamps
LPES Cargo Lamp
MBFS Bright Rear Bumper
MCMS Body Color Upper Fascia
MCTS Bright Front Bumper
MDAS Front License Plate Bracket
MFDS Bright Grille
MGAS Ram's Head Badge
MTDS SLT Badge
MWDS Removable Tailgate w/Caliper Latches
MXBS Front Air Dam
MXCS Front Bumper Sight Shields
NAS 50 State Emissions
NBKP EVAP Control System
NBQP Federal Tier 2, Bin 10A Emissions
NFWS 26 Gallon Fuel Tank
NHBP Auxiliary Transmission Oil Cooler
NHMS Speed Control
NMCP Heavy Duty Engine Cooling
NZDP Next Generation Engine Controller
PDMA Mineral Gray Met. Clear Coat
RAZ AM/FM Cassette Compact Disc Radio
RCKP Infinity Speakers
RDDP Fixed Long Mast Antenna
SBAS Power Rack and Pinion Steering
SCV Leather Wrapped Steering Wheel
SFBS Front Heavy Duty Shock Absorbers
SGBS Rear Heavy Duty Shock Absorbers
SHAS Front Stabilizer Bar
SUAS Tilt Steering Column
TBBS Full Size Spare Tire
TBMS Tire Carrier Winch
TTJP P275/60R20 BSW All Season Tires
TZAP Goodyear Brand Tires
WF3 20X9.0 Aluminum Polished Wheels
WGAP 20" Steel Spare Wheel
WLZC All Aluminum Wheels
WMJP Center Hub
XA8S Non Adjustable Pedals
XBSS Pickup Box
XFHP Class IV Receiver Hitch
XFKP 7 Pin Wiring Harness
XFUS Trailer Tow w/4-Pin Connector Wiring
XJL Front Hood Protection Shield
YAAS Build To U.S. Mkt. Specifications
ZARP Spring - Left Rear
ZDEP Spring - Left Front
ZNRP Spring - Right Rear
ZSDP Spring - Right Front
5I2S Two Wheel Drive (2WD)/(4X2)
5ZES 6 FT. Cargo Box
5ZJS Regular Cab
5ZLS 1500 Series
5ZWS DR-Vehicle Family
Thanks again for your email.
Sincerely,
Tony
Customer Service Representative
Dodge Customer Assistance Center

[UnderCover]

Love the grill! Now just need the bumper to match!

[SmokedRam]

Thanks, Art. I like the chrome bumpers actually. I just need to do something about them bed rail caps, so all the chrome is at or below the bumper line.

[SmokedRam]

Some more pic of the grille and the debadged tailgate (debadged all but the Ram's head badge)

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/photo12.jpg

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/photo13.jpg

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/photo10.jpg

[LB3711]

lookin good

Sent from my Transformer TF101 using Tapatalk 2

[SmokedRam]

Mmmmmmmmmm, damn I love this pic...

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/402124_316733471756286_1695498718_n.jpg

[SmokedRam]

AirAid modified intake tube installed:

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/574492_316787445084222_180131317_n.jpg

[AWE Daniel]

Looks good, and its "Modular" not modified lol.

[SmokedRam]

OH, well, it is modified...LOL...

[AWE Daniel]

The whole kit is modular as in you can use just the tube or the whole she-bang like i have.

[SmokedRam]

Dan, what did you do with your Air Hat brackets? Did you take them off or just leave them on?

[AWE Daniel]

Brackets? Ummmm I just unscrewed the thing, I think it screws into intake, im not sure there are separate brackets

[SmokedRam]

I'll snap a pic of them...but they are probably the same as yours. Just looks kind if weird with the air hat mounts still there.

[AWE Daniel]

Interesting

[AWE Daniel]

I just looked my stock thing mounted to the back of the oil filler and to a spot on the plastic intake manifold, those spots are molded In there, nothing you can do about them if you want to ever use the factory stuff again. They aren't that noticeable.

[SmokedRam]

time to update this a little...

New mod...2" rear lowering shackles, installed on 12-15-2012

New look:

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/DSCN0811.jpg


Also traded Alex a set of tinted tails and 3rd for a soft tonneau cover, which will be mounted as soon as I get the black ABS bed rail caps I just ordered from American Powerhouse (Gail)

[LB3711]

nice

[BAD HABIT]

Define some time to put a power wire on that thing next

on tapatalk from my GS3....

[SmokedRam]

Define some time to put a power wire on that thing next

on tapatalk from my GS3....

Yeah, I think that's gonna be my next mod after I do the bedcaps and tonneau. Wife is getting me some Sure Fits floor liners for my Bday!

[SC DAKUDA]

Truck looks really good the lowering shackles make a big difference in the look of the truck.

[SmokedRam]

Thanks bud...I'm loving it...everytime I walk outside, I sit and stare at it...lol

[SmokedRam]

Got some black ABS bed rail caps to throw on it, finally got the diamond plate bed rail caps off...

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/312351_373631426066490_635344359_n.jpg

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/9482_373631579399808_1549761932_n.jpg

[SmokedRam]

Yesterday, changed the plugs in it...

Take a peek at the ones that were in there.

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/376541_377216262374673_418373387_n.jpg

[AWE Daniel]

That actually doesn't look too bad, what kind did you replace them with?

[SmokedRam]

That actually doesn't look too bad, what kind did you replace them with?

They were actually pretty bad, gap was spread to 0.060 due to the electrodes being so worn.

Only ones I could find locally were the copper Champions, I WANTED NGK's but Advance only had 4 and I didn't want to wait for them to get them in from their warehouse. So I went up to NAPA and got Champions.

Autozone down here doesn't carry NGK or Champions.

[LB3711]

should be a big improvement.

Sent from my Transformer TF101 using Tapatalk 2

[SmokedRam]

should be a big improvement.

Sent from my Transformer TF101 using Tapatalk 2

I can verify that yes, it is...lol.

[4XLGator]

Tonneau cover and rail caps make a huge difference...looks good!

[repoman]

looking good adam!

[SmokedRam]

Thanks guys!

[Rebel_Lady91]

Lookin good adam

Sent from my SPH-M830 using Tapatalk 2

[SmokedRam]

Thanks chick....

In other news....
SmokedRam is going in the shop on Friday...having the stock exhaust yanked out, and having a si/do Flowmaster 40 series installed and dumped....will post sound clips when done.

Thanks to Jay for the Flowmaster.

[LB3711]

sweet

Sent from my Transformer TF101 using Tapatalk 2

[SmokedRam]

Bad Habit (Jay) gave me his Flowmaster 40 series. Had it welded on today, and dumped...

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/th_FB3313BB-2A71-4380-B267-DD5331704640-8997-00000443F7FDBD02_zpsba5cf1c6.jpg (http://s134.photobucket.com/albums/q100/tstewartdepotphotos/?action=view&current=FB3313BB-2A71-4380-B267-DD5331704640-8997-00000443F7FDBD02_zpsba5cf1c6.mp4)

[BAD HABIT]

thats whats up.

[LB3711]

sounds awesome. Sounds like my 4.7 in the dingo. Sounds better than my hemi

[SmokedRam]

Thanks guys!

[SmokedRam]

Added Wade Sure Fit floor liners, that my bootyful wife bought me for my birthday!

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/E0E4BA14-0C4C-4954-BE07-EDB7804F9515-12481-000005E206E0E2BC_zps8d9ea759.jpg

http://i134.photobucket.com/albums/q100/tstewartdepotphotos/64A83B21-8CAC-418A-B081-227B85B8832E-12481-000005E204D5BE61_zps0f0dc5ec.jpg

[ramn it]

Looks good!!

[LB3711]

nice