Added more LED's

[LB3711]

Got another small mod. I added the Recon Line of fire bar to the back of the Truck. Had to add more light to compensate for the tinted tails. I took some precautions on it. I used some auto/marine sealant to seal up the bar to prevent moisture. I did the top and bottom and sides. Looks like the lens over the LEDs are just snapped on so the seams are loose. Also on the side where the wire comes out is a loose fit there. Potential leak spots. It comes with the 4 pin connector but I didn't hook it top the combo 4/7 pin plug I have next to my plate. I bought another 4 pin connector and tapped off the wires on the plug that is on the back of the combo plug. So its still removable if needed and didn't modify the Recon bar at all. It came out good and way brighter than my tails.

Here are some pics of it.

Just the parking lights

http://farm8.staticflickr.com/7119/6887729826_6afb9d6ca0_b.jpg

Brake lights on

http://farm8.staticflickr.com/7079/6887729494_39b4996b28_b.jpg

Here is a close up

http://farm8.staticflickr.com/7237/6887729020_9a4b07cfb7_b.jpg

[AWE Daniel]

Nice!

[SmokedRam]

Sweeet!

[BAD HABIT]

very nice, i love mine

[DrewRam]

That looks great! I added one of those to my to do list recently

via DroidX (Tapatalk)

[BAD HABIT]

drew be sure to get a recon product on these cause other are sub par, imho. i got the white lightning, which lights white in reverse...

[4XLGator]

Very nice! I have one of these of my mods to do list.

[ramn it]

I like it !! I had a plasma junk and after the red LED's went out after 2 months I dont want another one !! If I get another one it will be recon!!

[LB3711]

well we will see what happens. Like I said I made sure it was sealed before I installed it to prevent moisture which usually is #1 thing that will kill electronics

Sent from my tapatalk equipped Transformer TF101