Heater not blowing hot

[tuned93]

Didn't know exactly where to post this but anyways... My heat and ac don't work properly. I know my ac condenser fan is broke, so I know what's wrong with the ac... But the heater doesn't blow hot, only blows cold. With the controls set to heat, full blast or low... Nothing. I have a baby due in a little less than a month so I need to get this fixed ASAP! Any ideas?

[BAD HABIT]

Start with checking the heater core...

Sent from my badass EVO on TapaTalk....

[FL06SRT10]

Blend door could be stuck also.

[AWE Daniel]

Yup those two things!^^^^^

[tuned93]

i heard about the blend door.. i havent even popped the hood yet to take a look. where should i look? pics would be nice...

[BAD HABIT]

Passenger floor board up under your dash, take off the blower motor and look up in there

Sent from my badass EVO on TapaTalk....

[tuned93]

Is the blend door around the blower motor? I took the dash apart today and found 2 actuators, one for the cold-hot knob and the other for the vent control. Both of those work fine. And I took off my heater hoses and cleaned and flushed them. Forgot to flush the heater core while the hoses were off. But I'm gonna do that tomorrow. So how exactly do I get to the blend door to check it?

[tuned93]

I figured it out. It was a clogged heater core. Shot a hose through it to clean it out and heat works fine now. The blend doors were both working just fine.

[AWE Daniel]

Awesome glad it was something simple

[AParrette]

could be the heater core

[03 Rammer]

Did you see my thread: CLR how to???? I had the same problem did a heater core flush on it and dont have any issues now.