PDA

View Full Version : Ball Joints and Control Arms..


BassMaster
10-25-2010, 06:27 PM
I'm trying to order all moog products but am a little confused, I just want to make sure these are the right part numbers.

Lower Ball Joints: MOOG Part # K7465
Driver Side Upper Control Arm: MOOG Part # K620174
Passenger Side Upper Control Arm: MOOG Part # K620175

My passenger side lowers have almost 3 inches of play. Ordering from RockAuto ASAP.

Oh it's a 2006 1500 Quad Cab 2wd.

BAD HABIT
10-25-2010, 07:20 PM
You getting bottoms too? I'd do all of them if your doing just uppers it's better to have all new ones at once rock auto is a good spot they usually have there part numbers right, I'd check google to make sure...

BassMaster
10-25-2010, 07:36 PM
The ball joint part number is lowers. I can only afford to do one side right now, im doing upper and lower on the passenger side, there's not much play on the driver side. But about 2 inches on the passenger. Driver side will come late November.

As soon as I get a confirmation that I've got the right part numbers I will be ordering. I've tried checking with google but it's kinda misleading.

BassMaster
11-02-2010, 07:07 PM
Just ordered the parts for both sides, the lowers were actually K7411

BassMaster
11-14-2010, 09:40 AM
Got them done about 7:30 last night, gonna have to go get an alignment today. Steering is a lot tighter and no more popping!

Took about 5 hours, got an upper done then we realized we didn't have a pickle fork for the bottoms so we had to put it all back together and run to the store.