Spare parts For Sale

[Redtruck-VA]

I have collected some parts and will be posting them here as I dig stuff out. Mostly Ram parts but there might also be other odd parts over time..

1. Got two sets of polyurethane bump stops for the front. These replace the OEM bumps/cups. One set is cut to 1-7/8" red (31" tire) and the other 1-3/8" black (30" tire). $15 shipped for each set.

2. 1 set of OEM rubber bumps and the metal cups removed from 03 Ram 1500. $35 shipped.

http://img51.imageshack.us/img51/4227/imag0017fi.jpg (http://imageshack.us/photo/my-images/51/imag0017fi.jpg/) These will keep your tires from rubbing the inner fender wells.

3. A pair of 03' OEM cats with choke point cut to take 3" pipe. These were orignally run as a single cat from the factory and as a pair they outflow most everything ouit there. 6" diameter. $120 shipped lower 48.

Note: the one on the left is showing the outlet and the one on the right the inlet. Both cats are cut the same.

http://img651.imageshack.us/img651/4459/img2011042700013.jpg (http://img651.imageshack.us/i/img2011042700013.jpg/)

4. Spring loaded flip license plate holder for roll pan. $15 shipped.

5. Front OEM license bracket (mounts to bumper) $12 shipped.

6. Rear OEM bumps stops. $25 shipped.

7. Pair oi OEM 5.7 exhaust manifolds. $75 shipped.

8. OEM "Y" pipe, make offer as I got no idea what it would take to ship.

9. OEM stock coil springs (602) and (603) These are the orignal springs from my 03 RCSB. $75 shipped.

10. OEM standard mirrors, these are manual mirrors, no power. $80 shipped

11. OEM Class IV hitch. $85 shipped

http://img192.imageshack.us/img192/6607/dsc00458cc.jpg (http://imageshack.us/photo/my-images/192/dsc00458cc.jpg/)

12. OEM open differential. Make offer to cover shipping.

13. OEM 3:55 ring & pinion. Make offer to cover shipping.

14. A pair of 3" ss fFlowMaster exhaust tips. Fit 2-1/2" pipe. These were welded on Red for about 5 years and will need to be welded when installed in their new home. $50 shipped.

http://img691.imageshack.us/img691/1749/img2011060700128.jpg (http://imageshack.us/photo/my-images/691/img2011060700128.jpg/)

http://img824.imageshack.us/img824/9562/img2011060700127.jpg (http://imageshack.us/photo/my-images/824/img2011060700127.jpg/)

http://img703.imageshack.us/img703/7186/img2011060700126.jpg (http://imageshack.us/photo/my-images/703/img2011060700126.jpg/)

15. I have a set of 03 ignition coils and wires. $50 shipped

16. 5.7 valve covers $45 shipped.

Offers and trades are always considered.

Thanks for looking,

[RACERAM9]

I am interested in the drop shackles I will get with you during the week, hoping to be working.......

[Redtruck-VA]

I am interested in the drop shackles I will get with you during the week, hoping to be working.......

Cool, PM me when you are ready...

[AWE Daniel]

Yo greg Ill buy those shackles from you right now, just pm me your paypal.

Sorry raceram...

[Redtruck-VA]

Payment pending on the shackles...

[4XLGator]

Yo greg Ill buy those shackles from you right now, just pm me your paypal.

Sorry raceram...

You dropping your truck or someone else's?


Sent from Lee's iPhone4 using Tapatalk

[Redtruck-VA]

Shackles sold...

[AWE Daniel]

My truck lee, its 2wd

[4XLGator]

Cool !

[AWE Daniel]

Yeah it should turn out nice

[Redtruck-VA]

With these and the O/L removed my truck sat level. IMO, it's a good look.

[AWE Daniel]

How hard is it to remove the O/L greg?

[Redtruck-VA]

How hard is it to remove the O/L greg?

Not hard, Have a jack stand under the frame with the wheel off and the axle hanging. I would remove the OEM shackle and undo the axle/spring U bolts so you can remove the spring pack center bolt. I used a "C" clamp to control the spring release. Remove the o/l spring from the pack. I used a philips screw driver stuck in the center bolt hole and tightened the spring pack back up using the "c" clamp to re-installed the center bolt. There is an alignment (split) pin that needs to be cut flush after the o/l is removed. I used a hand grinder. Then bolt it back together using the drop shackle. I did one side at a time. Piece of cake.

[Redtruck-VA]

Daniel, shackles mailed this morning 1st class, should arrive 2-3 days. Pls let me know when they arrive.
Thanks,

[AWE Daniel]

Thanks bud will do!

[RACERAM9]

ya know, That's f*cked up you didn't even give me a chance after the thread had sat for a week, :wtf2: F*uking 15 minutes you could at least PMed me EITHER of you.

[AWE Daniel]

Sorry bud

[BAD HABIT]

not hard D i did mine you seen how she sits, Racer sometimes money talks bud hope theres no hard feelings, ive lost out on parts cause i didnt have money readily available...

[AWE Daniel]

These are going on tomorrow afternoon hopefully

[Redtruck-VA]

ya know, That's f*cked up you didn't even give me a chance after the thread had sat for a week, :wtf2: F*uking 15 minutes you could at least PMed me EITHER of you.

Racer, buying and selling on a forum is always about the money. Didn't mean to piss you off, but that is how it works. sorry...

[Redtruck-VA]

These are going on tomorrow afternoon hopefully

Daniel, just jump in there and get it done. I've had my truck tore down for three days and it's killing me.

[AWE Daniel]

I have to get with my mechanic cuz i dont have air tools, should be a piece of cake for him.

[BAD HABIT]

i did it with basic tools bud...no air here...

[Redtruck-VA]

Air! man you don't need no stink'n air.... maybe a beer or two...

[AWE Daniel]

Lol itll be easier

[4XLGator]

^ and crooked too, if you drink too many! LOL

[AWE Daniel]

Hey greg and jay did you guys remove your overload spring? I am wondering if that is easy enough to do at the same time tomorrow.

[shadow11]

When I removed the o/l on my 05 it was a pain in the ass. I would just go with the drop shackles and leave the o/l leaf on. If you take it off the back will be a little lower than the front and you won't be able to haul very much weight.

[AWE Daniel]

Thats prob what I will end up doing shadow, I dont think my guy has enough time to get into the whole spring process tomorrow anyway.

[BAD HABIT]

i did it all in like an hr and half, my front is no where near higher in the front, i think my rear is sstill a half inch higher, i haul stuff and as long as its a normal load its fine....

heres what i have D....
directions to change drop shackles....
with your truck elevated on jack stands, place hydraulic jack under the rear axle and raise it until the weight is removed from the leaf spring. loosen and remove shackle bolts, and remove the stock shackle. install your new lowering shackle, tighten bolts, donot over tighten(this will cause squeaks and binding) remove the jack and jack stands your. ready to go!!!




and while you have the leafs loose just undo all the axle bolts(4) and drop the axle down(or lift truck up) and disassemble leaf pack, one bolt. and then remove the bottom spring it has a pin in it also, i used a flat bar and pried it off. reassemble the leafs with the bolt and put axle back together with 4 u-bolts and tighten everything down then attach drop shackles to truck and remove all jacks and stands....

[Redtruck-VA]

Absolutely do it all at once otherwise you will have to go back and redo much of the work. Caleb, I don't agree with you, they are called overload spring for a reason. I pull my trailer and use my truck for normal hualing and when I pulled the O/L years ago they had never touched the other springs. Unless you overload your truck IMO, you don't need them. Just extra wieght. Remove them and don't look back. It took me about 2 hours to remove the springs and install the shackles with the truck on the ground using jack stands and floor jack.

My truck sat level with the shackles and O/L removed.

Post #13 also has some info on how I did mine.

[Redtruck-VA]

Universl Cat sold..

[Red Ram]

Thanks greg! And also Adam for telling me about it lol

[Redtruck-VA]

Thanks greg! And also Adam for telling me about it lol

Welcome to the site and I mailed the cat out this morning, should arrive in 2-3 days. Let me know when it arrives.
Thanks,

[Red Ram]

Thanks! And will do man should be getting it installed first of the week, headed down to the lake on friday and I'm sure they will be closed monday.

[SmokedRam]

Thanks greg! And also Adam for telling me about it lol

NOt a prob man!!!

[Redtruck-VA]

Thanks! And will do man should be getting it installed first of the week, headed down to the lake on friday and I'm sure they will be closed monday.

Don't have measurements of your cat but you might get by with muffler clamps and a sawsall to cut the pipe. Just thinking out loud.

[Redtruck-VA]

Bump for new parts added.

Thanks for looking.

[Redtruck-VA]

Just added OEM original coil springs OEM standard mirrors.

[OklaHemi]

man those oem cats sound good right now...i would be murdered if i redid my exhaust again

[Redtruck-VA]

man those oem cats sound good right now...i would be murdered if i redid my exhaust again

LOL I can't count the number of times I have redone mine. Finally it is the way I want it. IMO I don't think the 03 OEM cats can be beat with the choke point cut off..

[OklaHemi]

i need some my exhaust stinks something horrible

[Redtruck-VA]

i need some my exhaust stinks something horrible

Back in the day we never really gave it any thought other than "exhaust stunk". But now within our personal enviorment we can choose. I prefer running cats and had these as a backup if the ones I currently have didn't workout.

[Redtruck-VA]

Added a couple more parts.

[Red Ram]

Hey man got the cat on thursday and installed today! Worked like a champ, and it does have a little more growl sound when you step on it. Just wanted to let ya know thanks.

[Redtruck-VA]

Hey man got the cat on thursday and installed today! Worked like a champ, and it does have a little more growl sound when you step on it. Just wanted to let ya know thanks.

Man, I'm glad you like it.

Thanks,

[Redtruck-VA]

Added another item to the list in the first post. anyone have a nice shift light they would like to trade for some on the list?

[Redtruck-VA]

Added a pair of used Flowmaster exhaust tips to the list.

[Redtruck-VA]

Update: added 03 5.7 ignition coils and wires to the list. $50 shipped

[Redtruck-VA]

Just added a set of 5.7 valve covers. $45 shipped.
Thanks for looking

[Redtruck-VA]

I have collected some parts and will be posting them here as I dig stuff out. Mostly Ram parts but there might also be other odd parts over time..

1. Got two sets of polyurethane bump stops for the front. These replace the OEM bumps/cups. One set is cut to 1-7/8" red (31" tire) and the other 1-3/8" black (30" tire). $15 shipped for each set.

2. 1 set of OEM rubber bumps and the metal cups removed from 03 Ram 1500. $35 shipped.

http://img51.imageshack.us/img51/4227/imag0017fi.jpg (http://imageshack.us/photo/my-images/51/imag0017fi.jpg/) These will keep your tires from rubbing the inner fender wells.

3. A pair of 03' OEM cats with choke point cut to take 3" pipe. These were orignally run as a single cat from the factory and as a pair they outflow most everything ouit there. 6" diameter. $120 shipped lower 48.

Note: the one on the left is showing the outlet and the one on the right the inlet. Both cats are cut the same.

http://img651.imageshack.us/img651/4459/img2011042700013.jpg (http://img651.imageshack.us/i/img2011042700013.jpg/)

4. Spring loaded flip license plate holder for roll pan. $15 shipped.

5. Front OEM license bracket (mounts to bumper) $12 shipped.

6. Rear OEM bumps stops. $25 shipped.

7. Pair oi OEM 5.7 exhaust manifolds. $75 shipped.

8. OEM "Y" pipe, make offer as I got no idea what it would take to ship.

9. OEM stock coil springs (602) and (603) These are the orignal springs from my 03 RCSB. $75 shipped.

10. OEM standard mirrors, these are manual mirrors, no power. $80 shipped

11. OEM Class IV hitch. $85 shipped

http://img192.imageshack.us/img192/6607/dsc00458cc.jpg (http://imageshack.us/photo/my-images/192/dsc00458cc.jpg/)

12. OEM open differential. Make offer to cover shipping.

13. OEM 3:55 ring & pinion. Make offer to cover shipping.

14. A pair of 3" ss fFlowMaster exhaust tips. Fit 2-1/2" pipe. These were welded on Red for about 5 years and will need to be welded when installed in their new home. $50 shipped.

http://img691.imageshack.us/img691/1749/img2011060700128.jpg (http://imageshack.us/photo/my-images/691/img2011060700128.jpg/)

http://img824.imageshack.us/img824/9562/img2011060700127.jpg (http://imageshack.us/photo/my-images/824/img2011060700127.jpg/)

http://img703.imageshack.us/img703/7186/img2011060700126.jpg (http://imageshack.us/photo/my-images/703/img2011060700126.jpg/)

15. I have a set of 03 ignition coils and wires. $50 shipped

16. 5.7 valve covers $45 shipped.

Offers and trades are always considered.

Thanks for looking,

Bump, last call for this season,....

[03MopaRamman]

I might be interested in Items 3, 15, and 16 Greg, but not till the next season opener (If you still got em) as I am way over budget this year and wanna sneak in the SRT-10 hood when my next pension cheque arrives.

[Redtruck-VA]

Danny, if they don't sell in the next couple of weeks they will be safe until spring. My wife likes to drive Red, but she doesn't care about handling or shipping parts. Doesn't know what she is missing. haha

[03MopaRamman]

Cool, no Probs. Off Topic I have your email and will contact you as I wanna really try and tackle both the shifter and the PSC-1-003 install in the next month (Damn Fence Takin up all my time) and may have some questions before I load the base Tune. Thanks.

[Redtruck-VA]

Cool, no Probs. Off Topic I have your email and will contact you as I wanna really try and tackle both the shifter and the PSC-1-003 install in the next month (Damn Fence Takin up all my time) and may have some questions before I load the base Tune. Thanks.

Danny, both mods are easier than they look. Email me anytime.