RamSport97
03-14-2011, 04:00 PM
Well, after being bored all week, I decided I would do some mild work on the interior over the weekend.
I pulled the dash bezel and cut out a stainless steel plate and flush mounted my scangauge2 in it, then installed it where the cupholder used to be. Also shot the bezel with some gloss black and a few coats of clear.
http://i54.photobucket.com/albums/g114/RiggsAlstott3340/IMG_20110314_154019.jpg
Then I pulled the hex bolts off of my arm rest and replaced them with rounded carriage bolts that I painted black. I decided to leave the center ones just for a little contrast.
Before:
http://i54.photobucket.com/albums/g114/RiggsAlstott3340/Truck/w.jpg
After:
http://i54.photobucket.com/albums/g114/RiggsAlstott3340/IMG_20110314_154027.jpg
I still have a lot more I would like to do before the April 2nd Wiregrass show.
I pulled the dash bezel and cut out a stainless steel plate and flush mounted my scangauge2 in it, then installed it where the cupholder used to be. Also shot the bezel with some gloss black and a few coats of clear.
http://i54.photobucket.com/albums/g114/RiggsAlstott3340/IMG_20110314_154019.jpg
Then I pulled the hex bolts off of my arm rest and replaced them with rounded carriage bolts that I painted black. I decided to leave the center ones just for a little contrast.
Before:
http://i54.photobucket.com/albums/g114/RiggsAlstott3340/Truck/w.jpg
After:
http://i54.photobucket.com/albums/g114/RiggsAlstott3340/IMG_20110314_154027.jpg
I still have a lot more I would like to do before the April 2nd Wiregrass show.